KUBER ENTERPRISES
Electrical | Kitchen | Metal Trading Applications

Your 30+ years experienced partner for conductors, metal trading, and more, with a strong presence across India.

PAN India strategic network

Customised Solutions

35+ Years Industry Experience

This is the heading

s
For Electrical Industry
 SL No.
 Actual Area
mm²
Stranding And Wire Dia
mm
Approx. Overall Dia
mm
Approx. Mass
Kg/Km
Calculated Maximum resistance at 20° C
Ohm/Km
Approx Calculated breaking load
KN
(1)
(2)
(3)
(4)
(5)
(6)
(7)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
15
22
34
55
80
100
125
148
173
200
232
288
346
400
465
525
570
604
642
695
767
3/2.50
7/2.00
7/2.50
7/3.15
7/3.81
7/4.26
19/2.89
19/3.15
19/3.40
19/3.66
19/3.94
37/3.15
37/3.45
37/3.71
37/4.00
61/3.31
61/3.45
61/3.55
61/3.66
61/3.81
61/4.00
5.39
6.00
7.50
9.45
11.43
12.78
14.45
15.75
17.00
18.30
19.70
22.05
24.15
25.97
28.00
29.79
31.05
31.95
32.94
34.29
36.00
40.15
60.16
94.00
149.20
218.26
272.86
342.51
406.91
474.02
549.40
636.67
794.05
952.56
1101.36
1280.50
1448.39
1573.71
1666.00
1771.36
1919.13
2115.54
2.3040
1.5410
0.9900
o.6210
0.4250
0.3390
0.2735
0.2290
0.1969
0.1710
0.1471
0.1182
o.0984
0.0829
0.0734
0.0651
0.0598
0.0568
0.0534
0.0492
0.0446
4.33
6.45
10.11
16.03
23.41
29.26
36.64
43.50
50.54
58.66
68.05
84.71
101.58
117.40
136.38
146.03
158.66
167.99
178.43
193.25
213.01
Nominal Aluminium area (1) mmStranding and wire diameter (2) mmSectional area (3) mm²Approx. Overall diameter (4) mmApproximate mass per km (5) KgCalculate D.C. resistance at 20° C per km (6) OhmCalculated breaking load (7) KN
257/2.2126.856.63741.0964.52
507/3.1052.839.301450.55258.25
1007/4.39106.013.172900.275215.96
15019/3.18150.915.904150.194223.28
24019/3.99237.619.956540.123535.74
30019/4.65322.723.258880.0910748.78

 

Nominal Aluminium (1) mm²Stranding and wire dia Aluminium (2) mmStranding and wire dia Steel (3) mmSectional Area of Aluminium (4) mm²Total Sectional Area (5) mm²Approx. diameter (6) mmApprox Mass (7) Kg/KmCalculate Resistance at 20°C C, max (8) Ohm/KmApprox Calculated Breaking Load (9) kN
(1) mm²(2) mm(3) mm(4) mm²(5) mm²(6) mm(7) Kg/Km(8) Ohm/Km(9) kN
10
18
20
13
50
80
100
150
200
400
420
520
560		6/1.50
6/1.96
6/2.11
6/2.59
6/3.35
6/4.09
6/4.72
30/2.59
30/3.00
42/3.50
54/3.18
54/3.53
42/4.13		1/1.50
1/1.96
1/2.11
1/2.59
1/3.35
1/4.09
7/1.57
7/2.59
7/3.00
7/1.96
7/3.18
7/3.53
7/2.30		10.60
18.10
20/98
31.61
52.88
78.83
105.0
158.1
212.1
404.1
428.9
528.5
562.7		12.37
21.12
24.48
36.88
61.70
91.97
118.5
194.9
261.5
425.2
484.5
597.0
591.7		4.50
5.88
6.33
7.77
10.05
12.27
14.15
18.13
21.00
26.88
28.62
31.77
31.68		43
73
85
128
214
319
394
726
974
1281
1621
1998
1781		2.780
1.618
1.394
0.9289
0.5524
0.3712
0.2792
0.1871
0.1390
0.07311
0.06868
0.05595
0.05231		3.97
6.74
7.16
11.12
18.25
26.91
32.41
67.34
89.67
88.79
130.32
159.60
120.16

 

Nominal Aluminium (1) mm²Stranding and wire dia Aluminium (2) mmStranding and wire dia Steel (3) mmSectional Area of Aluminium (4) mm²Total Sectional Area (5) mm²Approx. diameter (6) mmApprox Mass (7) Kg/KmCalculate Resistance at 20°C C, max (8) Ohm/KmApprox Calculated Breaking Load (9) kN
(1) mm²(2) mm(3) mm(4) mm²(5) mm²(6) mm(7) Kg/Km(8) Ohm/Km(9) kN
520
560
690		54/3.53
42/4.13
42/4.57		7/3.53
7/2.30
7/2.54		528.5
562.7
688.9		597.0
591.7
724.4		31.77
31.68
35.04		2.004
1.787
2.187		0.05552
0.05199
0.0424		161.20
120.16
146.87

 

Phase Conductor (Aluminum) Nominal Area Sq.mmConductor D.C Resistance at 20°C Ohm/kmNominal Thickness of Insulation Sq.mmStreet Lighting Conductor (Aluminum) Nominal Area Ohm/kmConductor D.C Resistance at 20° C mmNominal Thickness of Insulation Sq.mmMessenger Conductor (Aluminum Alloy) Nominal Area Sq.mmMaximum D.C Resistance at 20° C Ohm/KmMinimum Breaking Load kN
16
25
35
50
70
95		1.910
1.200
0.868
0.641
0.443
0.320		1.20
1.20
1.20
1.50
1.50
1.50		16
16
16
16
16		1.910
1.910
1.910
1.910
1.910		1.2
1.2
1.2
1.2
1.2		25
25
25
35
50
70		1.380
1.380
1.380
0.986
0.689
0.492		7.00
7.00
7.00
9.80
14.00
19.70

 

ProductDiameter (mm)Cond. (%IACS)UTS (Kg/Sq.mm)Elong. (%)Chemistry
13509.5+0.50,
12.5+0.50		>=61.29.50 – 12.50–Si-0.10, Fe.-0.40, Cu- 0.05, Ti+V 0.02, Mn- 0.01, CR.-0.01, Zn- 0.05, B- 0.05, Ga-0.03, other each 0.03 other total 0.10 Aluminium Min 99.5%

 

ProductAl (min)SiFeCuMgDiameter mmTensile Strength (Mpa) MinElongation 250 mm Gauge Length (%) MinConductivity (%) IACS min
AL -5798.50.450.120.030.429.50/12.01601252.5
Al-5998.50.40.120.30.389.50/12.01501253
6201980.50.50.10.67.60/9.5/12.5127.487>54

 

 SL No.
 Actual Area
mm²
Stranding And Wire Dia
mm
Approx. Overall Dia
mm
Approx. Mass
Kg/Km
Calculated Maximum resistance at 20° C
Ohm/Km
Approx Calculated breaking load
KN
(1)
(2)
(3)
(4)
(5)
(6)
(7)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
15
22
34
55
80
100
125
148
173
200
232
288
346
400
465
525
570
604
642
695
767
3/2.50
7/2.00
7/2.50
7/3.15
7/3.81
7/4.26
19/2.89
19/3.15
19/3.40
19/3.66
19/3.94
37/3.15
37/3.45
37/3.71
37/4.00
61/3.31
61/3.45
61/3.55
61/3.66
61/3.81
61/4.00
5.39
6.00
7.50
9.45
11.43
12.78
14.45
15.75
17.00
18.30
19.70
22.05
24.15
25.97
28.00
29.79
31.05
31.95
32.94
34.29
36.00
40.15
60.16
94.00
149.20
218.26
272.86
342.51
406.91
474.02
549.40
636.67
794.05
952.56
1101.36
1280.50
1448.39
1573.71
1666.00
1771.36
1919.13
2115.54
2.3040
1.5410
0.9900
o.6210
0.4250
0.3390
0.2735
0.2290
0.1969
0.1710
0.1471
0.1182
o.0984
0.0829
0.0734
0.0651
0.0598
0.0568
0.0534
0.0492
0.0446
4.33
6.45
10.11
16.03
23.41
29.26
36.64
43.50
50.54
58.66
68.05
84.71
101.58
117.40
136.38
146.03
158.66
167.99
178.43
193.25
213.01
Nominal Aluminium area (1) mmStranding and wire diameter (2) mmSectional area (3) mm²Approx. Overall diameter (4) mmApproximate mass per km (5) KgCalculate D.C. resistance at 20° C per km (6) OhmCalculated breaking load (7) KN
257/2.2126.856.63741.0964.52
507/3.1052.839.301450.55258.25
1007/4.39106.013.172900.275215.96
15019/3.18150.915.904150.194223.28
24019/3.99237.619.956540.123535.74
30019/4.65322.723.258880.0910748.78

 

Nominal Aluminium (1) mm²Stranding and wire dia Aluminium (2) mmStranding and wire dia Steel (3) mmSectional Area of Aluminium (4) mm²Total Sectional Area (5) mm²Approx. diameter (6) mmApprox Mass (7) Kg/KmCalculate Resistance at 20°C C, max (8) Ohm/KmApprox Calculated Breaking Load (9) kN
(1) mm²(2) mm(3) mm(4) mm²(5) mm²(6) mm(7) Kg/Km(8) Ohm/Km(9) kN
10
18
20
13
50
80
100
150
200
400
420
520
560		6/1.50
6/1.96
6/2.11
6/2.59
6/3.35
6/4.09
6/4.72
30/2.59
30/3.00
42/3.50
54/3.18
54/3.53
42/4.13		1/1.50
1/1.96
1/2.11
1/2.59
1/3.35
1/4.09
7/1.57
7/2.59
7/3.00
7/1.96
7/3.18
7/3.53
7/2.30		10.60
18.10
20/98
31.61
52.88
78.83
105.0
158.1
212.1
404.1
428.9
528.5
562.7		12.37
21.12
24.48
36.88
61.70
91.97
118.5
194.9
261.5
425.2
484.5
597.0
591.7		4.50
5.88
6.33
7.77
10.05
12.27
14.15
18.13
21.00
26.88
28.62
31.77
31.68		43
73
85
128
214
319
394
726
974
1281
1621
1998
1781		2.780
1.618
1.394
0.9289
0.5524
0.3712
0.2792
0.1871
0.1390
0.07311
0.06868
0.05595
0.05231		3.97
6.74
7.16
11.12
18.25
26.91
32.41
67.34
89.67
88.79
130.32
159.60
120.16

 

Nominal Aluminium (1) mm²Stranding and wire dia Aluminium (2) mmStranding and wire dia Steel (3) mmSectional Area of Aluminium (4) mm²Total Sectional Area (5) mm²Approx. diameter (6) mmApprox Mass (7) Kg/KmCalculate Resistance at 20°C C, max (8) Ohm/KmApprox Calculated Breaking Load (9) kN
(1) mm²(2) mm(3) mm(4) mm²(5) mm²(6) mm(7) Kg/Km(8) Ohm/Km(9) kN
520
560
690		54/3.53
42/4.13
42/4.57		7/3.53
7/2.30
7/2.54		528.5
562.7
688.9		597.0
591.7
724.4		31.77
31.68
35.04		2.004
1.787
2.187		0.05552
0.05199
0.0424		161.20
120.16
146.87

 

Phase Conductor (Aluminum) Nominal Area Sq.mmConductor D.C Resistance at 20°C Ohm/kmNominal Thickness of Insulation Sq.mmStreet Lighting Conductor (Aluminum) Nominal Area Ohm/kmConductor D.C Resistance at 20° C mmNominal Thickness of Insulation Sq.mmMessenger Conductor (Aluminum Alloy) Nominal Area Sq.mmMaximum D.C Resistance at 20° C Ohm/KmMinimum Breaking Load kN
16
25
35
50
70
95		1.910
1.200
0.868
0.641
0.443
0.320		1.20
1.20
1.20
1.50
1.50
1.50		16
16
16
16
16		1.910
1.910
1.910
1.910
1.910		1.2
1.2
1.2
1.2
1.2		25
25
25
35
50
70		1.380
1.380
1.380
0.986
0.689
0.492		7.00
7.00
7.00
9.80
14.00
19.70

 

ProductDiameter (mm)Cond. (%IACS)UTS (Kg/Sq.mm)Elong. (%)Chemistry
13509.5+0.50,
12.5+0.50		>=61.29.50 – 12.50–Si-0.10, Fe.-0.40, Cu- 0.05, Ti+V 0.02, Mn- 0.01, CR.-0.01, Zn- 0.05, B- 0.05, Ga-0.03, other each 0.03 other total 0.10 Aluminium Min 99.5%

 

ProductAl (min)SiFeCuMgDiameter mmTensile Strength (Mpa) MinElongation 250 mm Gauge Length (%) MinConductivity (%) IACS min
AL -5798.50.450.120.030.429.50/12.01601252.5
Al-5998.50.40.120.30.389.50/12.01501253
6201980.50.50.10.67.60/9.5/12.5127.487>54

 

For Steel Industry

Size 5mm-15mm (Dia)
Al 98.5%, Si 0.5%

Al 93%, 97%, 98%, 98.5%, 99%

Al 93%, 98%, 98.5%, 99%

Al 93%, 97%, 98%, 99%

For Automotive and General Engineering Industry
Alloy
SI
Fe
Cu
Mn
Mg
NI
Zn
Sn
TI
Pb
Cr
ACIA1.20max0.50max4.0-5.00.30max0.15max0.05max0.30max0.05max0.25max0.05max0.05max
AC1B0.20max0.35max4.2-5.00.10max0.15-0.350.05max0.10max0.05max0.05-0.300.05max0.05max
AC2A4.0-6.00.80max3.0-4.50.55max0.25max0.30max0.55max0.05max0.20max0.15max0.15max
AC2B5.0-7.01.0max2.0-4.00.50max0.50max0.35max1.00max0.10max0.20max0.20max0.20max
AC3A10.0-13.00.80max0.20max0.35max0.15max0.10max0.30max0.10max0.20max0.10max0.15max
AC4A8.0-10.00.40max0.25max0.3-0.60.3-0.60.10max0.25max0.05max0.20max0.10max0.15max
AC4B7.0-10.01.0max2.0-4.00.50max0.50max0.35max1.00max0.10max0.20max0.20max0.20max
AC4C6.5-7.50.55max0.25max0.35max0.25-0.450.10max0.35max0.05max0.20max0.10max0.10max
AC4CH6.5-7.50.20max0.20max0.10max0.30-0.450.5max0.10max0.05max0.20max0.05max0.05max
AC4D4.5-550.60max1.0-1.50.50max0.45-0.600.20max0.30max0.05max0.20max0.10max0.15max
AC5A0.60max0.80max3.5-4.50.35max1.30-1.801.7-23.30.15max0.05max0.20max0.05max0.15max
AC7A0.20max0.30max0.10max0.60max3.5-5.550.5max0.15max0.05max0.20max0.05max0.15max
AC8A11.0-13.00.80max0.8-1.30.15max0.80-1.300.8-1.50.15max0.05max0.20max0.05max0.10max
AC8B8.5-10.51.0max2.0-4.00.50max0.60-1.501.0-1.00.50max0.10max0.20max0.10max0.10max
AC8C8.5-10.51.0max2.0-4.00.50max0.60-1.500.50max0.50max0.10max0.20max0.10max0.10max
AC9A22.0-24.00.80max0.5-1.60.50max0.60-1.500.5-1.50.20max0.10max0.20max0.10max0.10max
AC9B18.0-20.00.80max05-1.60.50max0.60-1.500.5-1.50.20max0.10max0.20max0.10max0.10max
ADC111.0-13.01.30max1.0max0.3max0.3max0.5max0.5max0.1max   
ADC39.0-10.01.30max0.6max0.3max0.4-0.60.5max0.5max0.1max   
ADC50.3max1.80max0.2max0.3max4.1-8.50.1max0.1max0.1max   
ADC61.0max0.8max0.1max0.4-0.62.6-4.00.1max0.4max0.1max   
ADC107.5-9.50.9max2.0-4.00.5max0.3max0.5max1.0max0.3max   
ADC10Z7.5-9.51.3max2.0-4.00.5max0.3max0.5max3.0max0.3max   
ADC129.6-12.00.9max1.5-3.50.5max0.3max0.5max1.0max0.3max   
ADC12Z9.6-12.01.3max1.5-3.50.5max0.3max0.5max3.0max0.3max   
ADC1416.0-180.9max4.0-5.00.5max0.50-0.650.3max1.5max0.3max   
ALS113211-12.500.5-0.8max1.9-2.5max0.3max0.3max0.3max0.9max0.1max0.2max0.15max 
LM29.0-11.51.0max0.7-2.50.50max0.3max0.5max2.0max0.20max0.2max0.30max 
LM44.0-6.00.8max2.0-4.00.2-0.60.15max0.3max0.5max0.10max0.2max0.10max 
LM50.3max0.6max0.1max0.3-0.73.0-6.00.1max0.1max0.05max0.2max0.05max 
LM810.0-13.00.6max0.1max0.5max0.1max0.1max0.1max0.05max0.2max0.10max 
LM910.-13.00.6max0.1max0.3-0.70.2-0.60.1max0.1max0.05max0.2max0.10max 
LM100.25max0.35max0.1max0.1max9.5-110.1max0.1max0.05max0.2max0.05max 
LM122.5max1.0max9.0-110.6max0.2-0.40.5max0.8max0.10max0.2max0.10max 
LM1310.-12.01.0max0.7-1.50.5max0.8-1051.5m0.5max0.10max0.2max0.10max 
LM164.5-5.50.6max1.0-1.50.5max0.4-0.60.25max0.1max0.05max0.2max0.10max 
LM184.5-6.00.6max0.1max0.5max0.1max0.1max0.1max0.05max0.2max0.10max 
LM2010.0-13.01.0max0.4max0.5max0.2max0.1max0.2max0.10max0.2max0.10max 
LM215.0-7.01.0max3.0-5.00.2-0.60.1-0.30.3max2.0max0.10max0.2max0.20max 
LM224.0-6.00.6max2.8-3.80.2-0.60.05max0.15max0.15max0.05max0.2max0.10max 
LM247.5-9.51.3max3.0-4.00.5max0.3max0.5max3.0max0.20max0.2max0.30max 
LM256.5-7.50.5m0.1max0.3max0.2-0.450.1max0.1max0.05max0.2max0.10max 
LM268.5-10.51.2m2.0-4.00.5max0.5-1.51.0max1.0max0.10max0.2max0.20max 
LM276.0-8.00.8max1.5-2.50.2-0.60.3max0.3max1.0max0.10max0.2max0.20max 
LM2817-200.7max1.3-1.80.6max0.8-1.50.8-1.50.2max0.10max0.2max0.10max 
LM2922-250.7max0.13-1.30.6max0.8-1.30.8-1.30.2max0.10max0.2max0.10max 
LM3016-181.1m4.0-5.00.3max0.4-0.70.1max0.2max0.10max0.2max0.10max 
Alloy
SI
Fe
Cu
Mn
Mg
NI
Zn
Sn
TI
Pb
Cr
ACIA1.20max0.50max4.0-5.00.30max0.15max0.05max0.30max0.05max0.25max0.05max0.05max
AC1B0.20max0.35max4.2-5.00.10max0.15-0.350.05max0.10max0.05max0.05-0.300.05max0.05max
AC2A4.0-6.00.80max3.0-4.50.55max0.25max0.30max0.55max0.05max0.20max0.15max0.15max
AC2B5.0-7.01.0max2.0-4.00.50max0.50max0.35max1.00max0.10max0.20max0.20max0.20max
AC3A10.0-13.00.80max0.20max0.35max0.15max0.10max0.30max0.10max0.20max0.10max0.15max
AC4A8.0-10.00.40max0.25max0.3-0.60.3-0.60.10max0.25max0.05max0.20max0.10max0.15max
AC4B7.0-10.01.0max2.0-4.00.50max0.50max0.35max1.00max0.10max0.20max0.20max0.20max
AC4C6.5-7.50.55max0.25max0.35max0.25-0.450.10max0.35max0.05max0.20max0.10max0.10max
AC4CH6.5-7.50.20max0.20max0.10max0.30-0.450.5max0.10max0.05max0.20max0.05max0.05max
AC4D4.5-550.60max1.0-1.50.50max0.45-0.600.20max0.30max0.05max0.20max0.10max0.15max
AC5A0.60max0.80max3.5-4.50.35max1.30-1.801.7-23.30.15max0.05max0.20max0.05max0.15max
AC7A0.20max0.30max0.10max0.60max3.5-5.550.5max0.15max0.05max0.20max0.05max0.15max
AC8A11.0-13.00.80max0.8-1.30.15max0.80-1.300.8-1.50.15max0.05max0.20max0.05max0.10max
AC8B8.5-10.51.0max2.0-4.00.50max0.60-1.501.0-1.00.50max0.10max0.20max0.10max0.10max
AC8C8.5-10.51.0max2.0-4.00.50max0.60-1.500.50max0.50max0.10max0.20max0.10max0.10max
AC9A22.0-24.00.80max0.5-1.60.50max0.60-1.500.5-1.50.20max0.10max0.20max0.10max0.10max
AC9B18.0-20.00.80max05-1.60.50max0.60-1.500.5-1.50.20max0.10max0.20max0.10max0.10max
ADC111.0-13.01.30max1.0max0.3max0.3max0.5max0.5max0.1max   
ADC39.0-10.01.30max0.6max0.3max0.4-0.60.5max0.5max0.1max   
ADC50.3max1.80max0.2max0.3max4.1-8.50.1max0.1max0.1max   
ADC61.0max0.8max0.1max0.4-0.62.6-4.00.1max0.4max0.1max   
ADC107.5-9.50.9max2.0-4.00.5max0.3max0.5max1.0max0.3max   
ADC10Z7.5-9.51.3max2.0-4.00.5max0.3max0.5max3.0max0.3max   
ADC129.6-12.00.9max1.5-3.50.5max0.3max0.5max1.0max0.3max   
ADC12Z9.6-12.01.3max1.5-3.50.5max0.3max0.5max3.0max0.3max   
ADC1416.0-180.9max4.0-5.00.5max0.50-0.650.3max1.5max0.3max   
ALS113211-12.500.5-0.8max1.9-2.5max0.3max0.3max0.3max0.9max0.1max0.2max0.15max 
LM29.0-11.51.0max0.7-2.50.50max0.3max0.5max2.0max0.20max0.2max0.30max 
LM44.0-6.00.8max2.0-4.00.2-0.60.15max0.3max0.5max0.10max0.2max0.10max 
LM50.3max0.6max0.1max0.3-0.73.0-6.00.1max0.1max0.05max0.2max0.05max 
LM810.0-13.00.6max0.1max0.5max0.1max0.1max0.1max0.05max0.2max0.10max 
LM910.-13.00.6max0.1max0.3-0.70.2-0.60.1max0.1max0.05max0.2max0.10max 
LM100.25max0.35max0.1max0.1max9.5-110.1max0.1max0.05max0.2max0.05max 
LM122.5max1.0max9.0-110.6max0.2-0.40.5max0.8max0.10max0.2max0.10max 
LM1310.-12.01.0max0.7-1.50.5max0.8-1051.5m0.5max0.10max0.2max0.10max 
LM164.5-5.50.6max1.0-1.50.5max0.4-0.60.25max0.1max0.05max0.2max0.10max 
LM184.5-6.00.6max0.1max0.5max0.1max0.1max0.1max0.05max0.2max0.10max 
LM2010.0-13.01.0max0.4max0.5max0.2max0.1max0.2max0.10max0.2max0.10max 
LM215.0-7.01.0max3.0-5.00.2-0.60.1-0.30.3max2.0max0.10max0.2max0.20max 
LM224.0-6.00.6max2.8-3.80.2-0.60.05max0.15max0.15max0.05max0.2max0.10max 
LM247.5-9.51.3max3.0-4.00.5max0.3max0.5max3.0max0.20max0.2max0.30max 
LM256.5-7.50.5m0.1max0.3max0.2-0.450.1max0.1max0.05max0.2max0.10max 
LM268.5-10.51.2m2.0-4.00.5max0.5-1.51.0max1.0max0.10max0.2max0.20max 
LM276.0-8.00.8max1.5-2.50.2-0.60.3max0.3max1.0max0.10max0.2max0.20max 
LM2817-200.7max1.3-1.80.6max0.8-1.50.8-1.50.2max0.10max0.2max0.10max 
LM2922-250.7max0.13-1.30.6max0.8-1.30.8-1.30.2max0.10max0.2max0.10max 
LM3016-181.1m4.0-5.00.3max0.4-0.70.1max0.2max0.10max0.2max0.10max